Torque Power Single plane to suit early heads
Hi Guys, I have a port matched Torque power single plane manifold that I've been using on my hq headed 355 holden... My question is for a reasonably warm 355 and worked heads should I have the manifold...
View ArticleThis is advertising
Check this out Holden HZ GTS Monaro A1 5 Litre 308 V8 Auto Wires AIR STR 166K HK HT HQ HJ HX GT | eBay Looks like she is taking a dump :p
View Article360 into ap6
Has anyone done the above engine swap? I have just tonight sat mine in, im running a 727, the car was originally a six cyl. and im using summit adaptors and A971 Mackay mounts, I was wondering if you...
View ArticleFuel sender issue hj ute
Guys my previously gas only ute now back on petrol but gauge only goes to half when it's full. Is this fixable or knackered. Gauge was working fine when on gas, hj gts dash.
View ArticleWTD: Front runner tyres
Hi, im looking for a pair of tyres to replace the 145R15's that have seen better days. Im in se melb, so in vic would be great, Pm me with what you have, if none found ill just purchase some new ones...
View ArticleWYLDLC number plates (vic)
Hi all, I have a set of white on black number plates WYLDLC that I'm looking at selling. Will organize transfer papers. They are used but in good nick. $800 ono. Chris. 0430 649 575 or pm.
View Articleholden 304 head bolts into water jackets?
Have noticed my newly built 304 motor using a bit of coolant. Occurred to me that I didn't put any sealant on the head bolts when installing, I seem to recall thinking that was only needed on 308s but...
View ArticleLooking for Drag Racing Photos at Surfers Paradise Raceway 1968-69 of 56 Ford...
Cusso Photos "Revvin to Heaven" 56 Ford Customline 1968-69 at Surfers Paradise Raceway. The photo appeared in Australian Hot Rod Magazine.
View ArticleDoor trim style
I've been dyeing the door trims black and I'm after opinions. i thinking of maybe Putting carbon fibre on the door handle and the chrome strip or just dye the handle black. the chrome is in fairly...
View ArticleFuel gushing out filler
Guys. I have hj with 5ltr efi, vt in tank pump. When I remove filler cap there is extreme pressure and if I run the car with cap off petrol gushes out in huge amounts. Should tank pressure blow or suck...
View Article350 casting numbars
Ok trying to find some info on the cast numbers and numbers that have been written on a 4 bolt crate engine I have, The block cast number is 10066038, crank is 93426651 then written in marker pen is...
View ArticleWanted Quadrajet
G'day, im chasing a good quadrajet carby for my mild 308, what have you got for me ? Cheers
View ArticleMSD Billet 8360 Dizzy or Mallory HEI 85 series
I have both Dizzy's and not sure what to use on my mild street only sbc. In the past I have liked the HEI dizzy's due to there being no external coil so any opinions ? (Mallory part number - 8548201C)
View ArticleHq GTS Coupe Resto Mod
Hey Guys, I'm new at this so I will need to work out howto attach photo's. Here is my story so far. I bought the car from a guy inMelbourne off Ebay. I flew over from Perth on the Red Eye flight and...
View ArticleDart 215 SBC Iron Cylinder Heads to suit a 383
Hi All, Has anyone used these heads to date? I have a mate who's currently running a set of 195's and he wants to upgrade.. These look very economical and thought buying these and spending about a...
View Article286cam + boost
I kinda ask something similar in another thread i made but, would a crane 286 cam have a "negative" effect on a turbo 304, compared to a standard cam? how would the engine perform running the 286? like...
View ArticleTCE 3000 converter
TCE 3000 converter non lockup to suit T700 in perfect working working order local pick up only (Melbourne) $450
View ArticleGone from Front and Rear Sway Bars to None Now
Hi Guys When I bought the car I had front and rear sway bars and the car drove really well Now since I had my new 9" Diff made and fitted Adjustable Rear Top and Bottom Tubular Arms I do not have a...
View ArticleHj Hq Hz WB grill
hey everyone, not sure where i should have started this thread so its here for now. A mate and I have recently started doing more and more work outside our normal work which has led to a few one off...
View ArticleLive NOW: Throwdown in T-town.... 1/8 mile drag racing for big $$$
Its springtime in he US, and that means the baddest group of Pro Mods, Outlaw 10.5s, and more are on their way to Tulsa Raceway Park for the 2013 $50k Throw Down in T-Town I been watching since 7 am...
View Article