Got a few things I need to move. Anything not sold by the weekend will be listed on eBay.
HQ one tonner Cab $300
- Still connected to a bent chassis. No Diff or tail shaft, No front panels, No Doors, No seat or carpet.
- Has running 202 and Trimatic, Clean and registerable SA compliance plates(No Defect and not listed as written off), Dash pad and most of dash is there but unsure of condition anymore.
- Good clean cab for rebuild, Little rust and minor dents
- Tray is also there but not attached. Feel free to take it also
HQ one tonner doors $150
- Pretty clean, good for project, minor rust and straight.
- Complete with door linings, window mech and glass
Edelbrock Performer Manifold SBC 2101 $180
- Was on a 400 chev for approx 500kms
- Few water marks from washing car and coolant spill(nothing major)
Accel HEI in-cap super coil pt#140003 and Accel Distributor $200
- Was on a 400 chev for approx 500kms
- Includes Eagle 9mm Eliminator Series, Spiral core leads
- Excellent condition
2.9m of stainless steel braides -8AN fuel hose $60
- Excess hose I no longer require
-8AN Braided hose fittings $150
- 9 X straight. Never used
- 3 X 90 bends. Never used
- Also 2 X straight and 2 X 90 bends that have been fitted up but never any fuel ran through them
Chev into HQ extractors $300
- Fitted to car for only 500kms.
- Sand blasted and ready for paint but never got around to painting.
- No rust or dents
Edelbrock Elite 14x3 Air Cleaner Filter Holley Carb $100
- Fitted to car for 500kms
- Excellent condition
Have a complete and registable (SA), currently not registered, HQ one tonner thinking about selling. 253, 4 speed manual, white paint and bucket seats. Minor front end ding. Realistic Offers and I may sell it.
All this is no longer required. Was getting parts to build a one tonner. Changed my mind and sold most the stuff off. This is what I have left. Want it gone!!
Cant sort the photo stuff out, so if you want photo's send me an email and i'll attach photos to and email.
HQ one tonner Cab $300
- Still connected to a bent chassis. No Diff or tail shaft, No front panels, No Doors, No seat or carpet.
- Has running 202 and Trimatic, Clean and registerable SA compliance plates(No Defect and not listed as written off), Dash pad and most of dash is there but unsure of condition anymore.
- Good clean cab for rebuild, Little rust and minor dents
- Tray is also there but not attached. Feel free to take it also
HQ one tonner doors $150
- Pretty clean, good for project, minor rust and straight.
- Complete with door linings, window mech and glass
Edelbrock Performer Manifold SBC 2101 $180
- Was on a 400 chev for approx 500kms
- Few water marks from washing car and coolant spill(nothing major)
Accel HEI in-cap super coil pt#140003 and Accel Distributor $200
- Was on a 400 chev for approx 500kms
- Includes Eagle 9mm Eliminator Series, Spiral core leads
- Excellent condition
2.9m of stainless steel braides -8AN fuel hose $60
- Excess hose I no longer require
-8AN Braided hose fittings $150
- 9 X straight. Never used
- 3 X 90 bends. Never used
- Also 2 X straight and 2 X 90 bends that have been fitted up but never any fuel ran through them
Chev into HQ extractors $300
- Fitted to car for only 500kms.
- Sand blasted and ready for paint but never got around to painting.
- No rust or dents
Edelbrock Elite 14x3 Air Cleaner Filter Holley Carb $100
- Fitted to car for 500kms
- Excellent condition
Have a complete and registable (SA), currently not registered, HQ one tonner thinking about selling. 253, 4 speed manual, white paint and bucket seats. Minor front end ding. Realistic Offers and I may sell it.
All this is no longer required. Was getting parts to build a one tonner. Changed my mind and sold most the stuff off. This is what I have left. Want it gone!!
Cant sort the photo stuff out, so if you want photo's send me an email and i'll attach photos to and email.