i've got a 350 roller block sitting at work not doing anything, 20 thou, has all roller gear and cam, just needs a crank and bearings. Have a set of bare heads with it as well, were said to have been ported for a sprint car but i haven't had them checked out, they've been crack tested though and everything was fine
cylinder walls still have hone marks, was told they could maybe use a light hone but would be alright as is.
Was going to build a 383 but will probably end up just buying a crate motor as I haven't done anything with it.
If anyone wants to make an offer, msg me
Edit:
Might help if I mention it's in Brisbane, Virginia on the northside.
Also comes with crank, but it grabbed a bearing, no damage to the block but the crank is either stuffed or will need a regrind.
The block was built in the states i think and was running for 200 hours before the bearing went, as i said you can still see the hone markings.
cylinder walls still have hone marks, was told they could maybe use a light hone but would be alright as is.
Was going to build a 383 but will probably end up just buying a crate motor as I haven't done anything with it.
If anyone wants to make an offer, msg me
Edit:
Might help if I mention it's in Brisbane, Virginia on the northside.
Also comes with crank, but it grabbed a bearing, no damage to the block but the crank is either stuffed or will need a regrind.
The block was built in the states i think and was running for 200 hours before the bearing went, as i said you can still see the hone markings.