Hi guys just a quick question ... I think I'm over the Holley Red/Blue/Black range with my third one playing up now. It's about 2 months old!
What should I replace my Holley Blue with that is similar spec (as below), reasonably priced (< $200) and is pretty much a bolt in replacement? Also where should I buy it from and how much?
I would prefer suggestions from experience rather than just brand opinions. Don't mean to be rude.
Features
What should I replace my Holley Blue with that is similar spec (as below), reasonably priced (< $200) and is pretty much a bolt in replacement? Also where should I buy it from and how much?
I would prefer suggestions from experience rather than just brand opinions. Don't mean to be rude.
Features
- Tumble polished billet look
- New lower housing casting for enhanced fuel flow
- Motor draws only 3 amps current
- 7 1/2 amp fuse recommended
- Improved design for street/strip applications
- Distinctive “BLUE” logo
- Flows 110 GPH (free flow)
- Flows 88 GPH at 9 PSI
- Maximum pressure is 14 PSI
- Includes P/N 12-803 fuel pressure regulator
- Provides constant fuel flow with no pulsation
- Has externally accessible pressure relief valve (max 14 PSI)
- Rotor/Vane pump design is more tolerant of contaminated fuels
- Weighs only 3 lbs
- Includes mounting bracket
- Repair kits are readily available
- Can be serviced from the pump end
- NOT compatible with alcohol or methanol fuels
- Use of safety shut-off switch, P/N 12-810, strongly recommended
- Not designed or recommended for use with fuel injection systems